纹身大全 
您所在的位置是：
SPARC/Solaris 8下快速终结TCP有限状态机的TIME_WAIT状态 1987年10月1日(可真够早的)cdjohns@nswc-g.arpa提供了一个shell script，用于 SunOS 4.x系统下快速终结TCP有限状态机的TIME_WAIT状态。很奇怪，这个脚本并未 得到人们的足够重视并广泛流传，直到SunOS 4.x退出历史舞台，它也就销声匿迹了。 昨天被backend从故纸堆里翻了出来，我们就趁机移植到SPARC/Solaris 8下来。 /usr/include/netinet里的文件多是为用户空间编程准备的，/usr/include/inet里 的文件多是为内核空间编程准备的。下面内容取自SPARC/Solaris 8 -------------------------------------------------------------------------- /* * /usr/include/inet/tcp.h */ /* * TCP states */ #define TCPS_CLOSED -6 #define TCPS_IDLE -5 /* idle (opened， but not bound) */ #define TCPS_BOUND -4 /* bound， ready to connect or accept */ #define TCPS_LISTEN -3 /* listening for connection */ #define TCPS_SYN_SENT -2 /* active， have sent syn */ #define TCPS_SYN_RCVD -1 /* have received syn (and sent ours) */ /* * states < TCPS_ESTABLISHED are those where connections not established */ #define TCPS_ESTABLISHED 0 /* established */ #define TCPS_CLOSE_WAIT 1 /* rcvd fin， waiting for close */ /* * states > TCPS_CLOSE_WAIT are those where user has closed */ #define TCPS_FIN_WAIT_1 2 /* have closed and sent fin */ #define TCPS_CLOSING 3 /* closed， xchd FIN， await FIN ACK */ #define TCPS_LAST_ACK 4 /* had fin and close; await FIN ACK */ /* * states > TCPS_CLOSE_WAIT && < TCPS_FIN_WAIT_2 await ACK of FIN */ #define TCPS_FIN_WAIT_2 5 /* have closed， fin is acked */ #define TCPS_TIME_WAIT 6 /* in 2*msl quiet wait after close */ #if (defined(_KERNEL) || defined(_KMEMUSER)) /* * If the information represented by the field is required even in the * TIME_WAIT state， it must be part of tcpb_t. Otherwise it must be part * of tcp_t. In other words， the tcp_t captures the information that is * not required， after a connection has entered the TIME_WAIT state. */ typedef struct tcp_base_s { struct tcp_base_s *tcpb_bind_hash; /* Bind hash chain */ struct tcp_base_s **tcpb_ptpbhn; /* Pointer to previous bind hash next. */ struct tcp_base_s *tcpb_conn_hash; /* Connect hash chain */ struct tcp_base_s **tcpb_ptpchn; /* Pointer to previous conn hash next. */ struct tcp_base_s *tcpb_time_wait_next; /* Pointer to next T/W block */ struct tcp_base_s *tcpb_time_wait_prev; /* Pointer to previous T/W next */ /* * /usr/include/sys/types.h * typedef long clock_t; * offset: 8 * 6 -> 48 -> 0x30，clock_t占8个字节(64-bit kernel mode) */ clock_t tcpb_time_wait_expire; /* time in hz when t/w expires */ clock_t tcpb_last_rcv_lbolt; /* lbolt on last packet， used for PAWS */ /* * offset: 0x40 */ int32_t tcpb_state; int32_t tcpb_rcv_ws; /* My window scale power */ int32_t tcpb_snd_ws; /* Sender's window scale power */ uint32_t tcpb_ts_recent; /* Timestamp of earliest unacked */ /* * data segment * offset: 0x50 */ clock_t tcpb_rto; /* Round trip timeout */ uint32_t tcpb_snd_ts_ok : 1， tcpb_snd_ws_ok : 1， tcpb_is_secure : 1， tcpb_reuseaddr : 1， /* SO_REUSEADDR "socket" option. */ tcpb_exclbind : 1， /* ``exclusive'' binding */ tcpb_junk_fill_thru_bit_31 : 27; /* * offset: 0x5c */ uint32_t tcpb_snxt; /* Senders next seq num */ uint32_t tcpb_swnd; /* Senders window (relative to suna) */ uint32_t tcpb_mss; /* Max segment size */ uint32_t tcpb_iss; /* Initial send seq num */ /* * offset: 0x6c */ uint32_t tcpb_rnxt; /* Seq we expect to recv next */ uint32_t tcpb_rwnd; /* Current receive window */ /* * /usr/include/sys/mutex.h * 无论64-bit还是32-bit kernel mode，kmutex_t都占8字节空间，这里需要对 * 齐在数据类型自然连界上，0x6c + 8 -> 0x74不在kmutex_t自然边界上，继 * 续后移4个字节 * * offset: 0x78 */ kmutex_t tcpb_reflock; /* Protects tcp_refcnt */ /* * offset: 0x80 */ ushort_t tcpb_refcnt; /* Number of pending upstream msg */ union { struct { uchar_t v4_ttl; /* Dup of tcp_ipha.iph_type_of_service */ uchar_t v4_tos; /* Dup of tcp_ipha.iph_ttl */ } v4_hdr_info; struct { /* * 对齐在uint_t的自然边界上 * offset: 0x84 */ uint_t v6_vcf; /* Dup of tcp_ip6h.ip6h_vcf */ /* * offset: 0x88 */ uchar_t v6_hops; /* Dup of tcp_ip6h.ip6h_hops */ } v6_hdr_info; } tcpb_hdr_info; #define tcpb_ttl tcpb_hdr_info.v4_hdr_info.v4_ttl #define tcpb_tos tcpb_hdr_info.v4_hdr_info.v4_tos #define tcpb_ip6_vcf tcpb_hdr_info.v6_hdr_info.v6_vcf #define tcpb_ip6_hops tcpb_hdr_info.v6_hdr_info.v6_hops /* * offset: 0x8c，先是远端地址，后是本地地址 * /usr/include/netinet/in.h * in6_addr_t长16字节，在内核空间里这个结构对齐在uint32_t的自然边界上 */ in6_addr_t tcpb_remote_v6; /* true remote address - needed for */ /* source routing. */ in6_addr_t tcpb_bound_source_v6; /* IP address in bind_req */ /* * offset: 0xac */ in6_addr_t tcpb_ip_src_v6; /* same as tcp_iph.iph_src. */ #ifdef _KERNEL /* * Note: V4_PART_OF_V6 is meant to be used only for _KERNEL defined stuff */ #define tcpb_remote V4_PART_OF_V6(tcpb_remote_v6) #define tcpb_bound_source V4_PART_OF_V6(tcpb_bound_source_v6) #define tcpb_ip_src V4_PART_OF_V6(tcpb_ip_src_v6) #endif /* _KERNEL */ /* * These fields contain the same information as tcp_tcph->th_*port. * However， the lookup functions can not use the header fields * since during IP option manipulation the tcp_tcph pointer * changes. */ /* * offset: 0xbc，先是远端端口，后是本地端口 */ union { struct { in_port_t tcpu_fport; /* Remote port */ in_port_t tcpu_lport; /* Local port */ } tcpu_ports1; uint32_t tcpu_ports2; /* Rem port， local port */ /* * Used for TCP_MATCH performance */ } tcpb_tcpu; #define tcpb_fport tcpb_tcpu.tcpu_ports1.tcpu_fport #define tcpb_lport tcpb_tcpu.tcpu_ports1.tcpu_lport #define tcpb_ports tcpb_tcpu.tcpu_ports2 /* * IP sends back 2 mblks with the unbind ACK for handling * IPSEC policy for detached connections. Following two fields * are initialized then. */ mblk_t *tcpb_ipsec_out; mblk_t *tcpb_ipsec_req_in; /* * offset: 0xd0 */ tcp_t *tcpb_tcp; /* * offset: 0xd8 */ /* * IP format that packets transmitted from this struct should use. * Value can be IPV4_VERSION or IPV6_VERSION. Determines whether * IP+TCP header template above stores an IPv4 or IPv6 header. */ ushort_t tcpb_ipversion; uint_t tcpb_bound_if; /* IPV6_BOUND_IF */ uid_t tcpb_ownerid; /* uid of process that did open */ #define tcp_bind_hash tcp_base->tcpb_bind_hash #define tcp_ptpbhn tcp_base->tcpb_ptpbhn #define tcp_conn_hash tcp_base->tcpb_conn_hash #define tcp_ptpchn tcp_base->tcpb_ptpchn #define tcp_time_wait_next tcp_base->tcpb_time_wait_next #define tcp_time_wait_prev tcp_base->tcpb_time_wait_prev #define tcp_time_wait_expire tcp_base->tcpb_time_wait_expire #define tcp_last_rcv_lbolt tcp_base->tcpb_last_rcv_lbolt #define tcp_state tcp_base->tcpb_state #define tcp_rcv_ws tcp_base->tcpb_rcv_ws #define tcp_snd_ws tcp_base->tcpb_snd_ws #define tcp_ts_recent tcp_base->tcpb_ts_recent #define tcp_rto tcp_base->tcpb_rto #define tcp_snd_ts_ok tcp_base->tcpb_snd_ts_ok #define tcp_snd_ws_ok tcp_base->tcpb_snd_ws_ok #define tcp_is_secure tcp_base->tcpb_is_secure #define tcp_snxt tcp_base->tcpb_snxt #define tcp_swnd tcp_base->tcpb_swnd #define tcp_mss tcp_base->tcpb_mss #define tcp_iss tcp_base->tcpb_iss #define tcp_rnxt tcp_base->tcpb_rnxt #define tcp_rwnd tcp_base->tcpb_rwnd #define tcp_reflock tcp_base->tcpb_reflock #define tcp_refcnt tcp_base->tcpb_refcnt #define tcp_remote_v6 tcp_base->tcpb_remote_v6 #define tcp_remote tcp_base->tcpb_remote #define tcp_bound_source_v6 tcp_base->tcpb_bound_source_v6 #define tcp_bound_source tcp_base->tcpb_bound_source #define tcp_lport tcp_base->tcpb_tcpu.tcpu_ports1.tcpu_lport #define tcp_fport tcp_base->tcpb_tcpu.tcpu_ports1.tcpu_fport #define tcp_ports tcp_base->tcpb_tcpu.tcpu_ports2 #define tcp_ipsec_out tcp_base->tcpb_ipsec_out #define tcp_ipsec_req_in tcp_base->tcpb_ipsec_req_in #define tcp_ipversion tcp_base->tcpb_ipversion #define tcp_bound_if tcp_base->tcpb_bound_if #define tcp_reuseaddr tcp_base->tcpb_reuseaddr #define tcp_exclbind tcp_base->tcpb_exclbind #define tcp_ownerid tcp_base->tcpb_ownerid } tcpb_t; #endif /* (defined(_KERNEL) || defined(_KMEMUSER)) */ -------------------------------------------------------------------------- 下面这两条命令其实是用分号连在一起执行的，否则前后数据不对应，我是telnet上 去执行命令。 # ndd /dev/tcp tcp_status | grep ESTABLISHED TCPB dest snxt suna swnd rnxt rack rwnd rto mss w sw rw t recent [lport，fport] state 30000cc21d0 ::ffff:192.168.5.8 8e0e46dc 8e0e46da 0000064010 3d49e751 3d49e751 0000024820 00583 01460 0 00 00 0 00000000 [23， 4613] TCP_ESTABLISHED # skd64 0x30000cc21d0 256 byteArray [ 256 bytes ] ----> 0000000000000000 00 00 03 00 00 47 C1 80-00 00 00 00 10 48 18 88 .....G羳.....H.? 0000000000000010 00 00 00 00 00 00 00 00-00 00 03 00 00 3A 60 80 .............:`� 0000000000000020 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ 0000000000000030 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ 0000000000000040 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ 0000000000000050 00 00 00 00 00 00 02 47-10 00 00 00 8E 0E 46 DC .......G....?F? 0000000000000060 00 00 FA 0A 00 00 05 B4-8E 0B 77 07 3D 49 E7 51 ..?...磶.w.=I鏠 0000000000000070 00 00 60 F4 00 00 00 00-00 00 00 00 00 00 00 00 ..`?........... 0000000000000080 00 01 00 00 3C 00 00 00-3C 00 00 00 00 00 00 00 ....<...<....... 0000000000000090 00 00 00 00 00 00 FF FF-C0 A8 05 08 00 00 00 00 ......��括...... 00000000000000A0 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ 00000000000000B0 00 00 00 00 00 00 FF FF-C0 A8 05 82 12 05 00 17 ......��括.?... 00000000000000C0 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ 00000000000000D0 00 00 03 00 00 BB 6F D0-00 04 00 00 00 00 00 00 .....籵?....... 00000000000000E0 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................ 00000000000000F0 00 00 03 00 00 08 2B 68-00 00 00 00 00 00 00 00 ......+h........ # 显然0x30000cc21d0对应着一个tcpb_t结构。 # adb -k /dev/ksyms /dev/mem physmem 3b68 0x30000cc21d0$ 30000cc21d0: tcp_bind_hash tcp_ptpbhn tcp_conn_hash 3000047c180 10481888 0 30000cc21e8: tcp_ptpchn time_wait_next time_wait_prev 300003a6080 0 0 30000cc2200: time_wait_expir last_rcv_lbolt tcp_state 0 0 0 30000cc2214: tcp_rcv_ws tcp_snd_ws tcp_ts_recent 0 0 0 30000cc2220: tcp_rto 24c snd_ts_ok 0 snd_ws_ok 0 is_secure 0 reuseaddr 1 exclbind 0 30000cc222c: tcp_snxt tcp_swnd tcp_mss 8e176ce4 f8dc 5b4 30000cc2238: tcp_iss tcp_rnxt tcp_rwnd 8e0b7707 3d49ecf0 60f4 30000cc2248: tcpb_reflock 30000cc2248: owner/waiters 0 30000cc2250: tcp_refcnt tcpb_vcf tcpb_hops 1 3c000000 3c 30000cc225c: tcpb_remote_v6 30000cc225c: 0 0 ffff c0a80508 30000cc226c: tcpb_bound_source_v6 30000cc226c: 0 0 0 0 30000cc227c: tcpb_ip_src_v6 30000cc227c: 0 0 ffff c0a80582 30000cc228c: tcpu_fport tcpu_lport ipsec_out 1205 17 0 30000cc2298: ipsec_req_in tcpb_tcp tcpb_ipversion 0 30000bb6fd0 4 30000cc22ac: bound_if ownerid 0 0 $q # 于是我们可以写这样一个脚本kill_timewait.sh -------------------------------------------------------------------------- #! /sbin/sh # # # @(#)kill_timewait.sh 2002-07-07 NSFocus Copyleft 2002-2012 # # Notice here is copyleft but not copyright， enjoy it by yourself. # # ------------------------------------------------------------------------ # File : kill_timewait.sh # Platform : SPARC/Solaris 8 64-bit kernel mode # Author : NSFocus Security Team # : # Date : 2002-07-07 12:27 # Modify : # Thanks :cdjohns@nswc-g.arpa for SunOS 4.x implementation # netstat -na -P tcp -f inet | grep TIME_WAIT echo echo 'TCPB dest [lport，fport] state' echo ndd /dev/tcp tcp_status | nawk '{print $1 " " $2 " " $16 $17 " " $18}' | egrep 'TIME_WAIT' echo /usr/bin/echo 'TCPB address to terminate: \c' read tcpb_addr echo adb -k /dev/ksyms /dev/mem << NSFOCUS_EOF $tcpb_addr$ $q NSFOCUS_EOF # # Check to see if this was the correct address and TCPB. state should be 6 # echo echo 'tcp_state = 6 = TCPS_TIME_WAIT' /usr/bin/echo 'Is this the correct TCPB (y/n)? \c' read answer echo case $answer in [Yy]*) ;; *) echo 'No Changes.' exit ;; esac # # Kernel Hacking， please. These value are expressed in hexadecimal. # TIME_WAIT_EXPIRE_OFFSET=0x30 STATE_OFFSET=0x40 # # This value is expressed in decimal and must be greater than zero. # TIME_WAIT_EXPIRE=0t06 # # Use adb on kernel to set the tcpb_time_wait_expire=6 and # tcpb_state=TCPS_CLOSED (-6) # adb -kw /dev/ksyms /dev/mem << NSFOCUS_EOF $tcpb_addr+$TIME_WAIT_EXPIRE_OFFSET/Z $TIME_WAIT_EXPIRE $tcpb_addr+$STATE_OFFSET/W -6 $q NSFOCUS_EOF echo echo "TIME_WAIT state will disappear." echo netstat -na -P tcp -f inet | grep TIME_WAIT -------------------------------------------------------------------------- 不要设置tcpb_time_wait_expire成零，只要是一个很小的值就可以了。这里必须同 时设置tcpb_time_wait_expire和tcpb_state，只设置其中一个达不到效果。 利用adb从TCPS_ESTABLISHED变为TCPS_CLOSE_WAIT，可以使一条TCP连接不再工作， 但这条连接并未销毁，tcpb_t结构也未删除。 利用adb从TCPS_ESTABLISHED变为TCPS_CLOSED，会导致整个操作系统崩溃。可能是下 层tcpb_t结构被删除，而上层socket并不了解，出现非法指针。 简化一下kill_timewait.sh -------------------------------------------------------------------------- #! /sbin/sh ndd /dev/tcp tcp_status | nawk '{print $1 " " $2 " " $16 $17 " " $18}' | egrep 'TIME_WAIT' echo /usr/bin/echo 'TCPB address to terminate: \c' read tcpb_addr echo adb -kw /dev/ksyms /dev/mem << NSFOCUS_EOF $tcpb_addr+0x30/Z 0t6 $tcpb_addr+0x40/W -6 $q NSFOCUS_EOF -------------------------------------------------------------------------- 还可以写一个脚本自动清除所有TIME_WAIT状态TCP连接 -------------------------------------------------------------------------- #! /sbin/sh ndd /dev/tcp tcp_status | nawk '{print $1 " " $2 " " $16 $17 " " $18}' | \ egrep 'TIME_WAIT' | cut -d' ' -f1 | while read tcpb_addr do adb -kw /dev/ksyms /dev/mem << NSFOCUS_EOF $tcpb_addr+0x30/Z 0t6 $tcpb_addr+0x40/W -6
2006年10月14日 12:56 ChinaByte
